Archivio

Archivio per marzo 2011

Aadaptiv ECDIS – Radar monitors for Sunlight & Daylight

Aadaptiv logo TECHNOLOGIES have presented their GlassBridge LED series of monitor for marine applications. The monitor sizes available are 15in, 19in, 20in Wide and 22in Wide. The GlassBridge LED series feature an impressive set of options, all included. ‘Edge 2 Edge’ AR SAFETY GLASS 6mm. laminated and bonded to IP67/NEMA6 sealing, ‘Mix & Match’ LED backlit technology to meet HIGH AMBIENT LIGHT conditions, ‘Picture by Picture’ – Same Source Type, Touch sensitive controls for brightness and DIMMING to less than 1CD/m2, DUAL VOLTAGE integrated AC/DC for HIGH REDUNDANCY and seamless power switching.

ECDIS RADAR display

Inputs for 9 SOURCE SIGNAL TYPE are provided: DVI-D, RGB, S-Video and Composite. Each monitor is equipped with software configurable RS232 and RS422/485 ports enabling communications between monitors connected to a host PC or 3rd party OEM products. The monitors are individually ADDRESSABLE for connection to a network
CRT REPLACEMENT: Aadaptiv Monitors support ‘Slow Scan’ signals typically at 15kHz found on old CRT based legacy systems (Automation /Process Control) and optimises the image for the LCD Display. User selects RGB Wizard from within the Menu and the monitor will automatically attempt to sync to the signal – subject to having reliable/stable signal source.

Gary Wright, President & CEO of Aadaptiv Technolgies confirmed that decades of experience have been inglobated in the design of this GlassBridge LED series of monitors.

Retro 19 inch

Aadaptiv Technologies ha presentato la serie di monitors GlassBridge LED per applicazioni marine. Le taglie disponibili sono 15in, 19in, 20in Wide and 22in Wide. Le caratteristiche della serie GlassBridge LED presentano una serie impressionanti di opzioni, tutte incluse. ‘Edge 2 Edge’ AR VETRO DI SICUREZZA da 6mm. laminato e sigillato con protezione IP67/NEMA6, ‘Mix & Match’ Retroilluminazione LED per visibilità in AMBIENTI MOLTO LUMINOSI, ‘Picture by Picture’ per stesso Tipo di Segnale, Controlli sensibili al tatto per luminosità e OSCURAMENTO (Dimming) fino a un minimo di 1CD/m2, DOPPIA ALIMENTAZIONE integrata AC/DC per ELEVATA RIDONDANZA e scambio senza soluzione di continuità.

Sono accettati 9 TIPI DI SEGNALE di ingresso: DVI-D, RGB, S-Video e Composito. Ogni monitor é equipaggiato di porte RS232 e RS422/485 configurabili via software che consentono la comunicazione tra monitors connessi a PC o a prodotti OEM di terze parti. I monitors sono singolarmente INDIRIZZABILI per connessione in rete
SOSTITUZIONE di CRT: I monitor Aadaptiv supportano i segnali ‘Bassa frequenza di Scansione’ (15kHz) tipici dei vecchi sistemi (Automation /Process Control) dotati di Monitor a Tubo Catodico (CRT) e ottimizzano l’immagine per il display LCD. L’Utente seleziona la funzione ‘RGB Wizard’ dal Menu e il monitor si occuperà automaticamente di sincronizzare il segnale – a condizione che sia disponibile una sorgente di segnale affidabile e stabile.

Gary Wright, Presidente & CEO of Aadaptiv Technolgies, conferma che nel progetto di questa serie di monitors GlassBridge LED sono stati inglobati decenni di esperienza.

Categories: Marittimo, Monitoring, News, Yachts Etichette:

Boss Yacht Oily Water Separators MEPC107

After January of 2005, many countries began requiring Oily Water Separators (over 400 tons) to meet the IMO MEPC 107(49) regulation.

This regulation requires removal of not only free oil as the previous regulation did, but also what is called “fluid C” (chemicals).

The BOSS 107 Series of Recoverd Energy Inc. (USA) brings you the best, most economical system available today to meet this new requirement. The boss 107 series is ranging from a flow as low as 2 GPM (0,45 m3/h)  up to 45 GPM (10,5 m3/h).

The last  launched is a very compact model for yachts. The Boss 107 Yacht is fully certified USCG ABS and MED

The system is self-priming and allows simplified installation with reliable operations backed-up by a quick delivery service for consumables. A post separation polishing for non-detect hydrocarbons is provided. The separator dimensions are mm.772 x 750 with a height of mm.1061 and part of the components can be split to fit in small spaces.

Categories: News, Yachts Etichette: